Navigation buttons above
*The above tour consists of ‘snapshots’ from the Training Course on Heat Exchangers, which focuses on Multimedia inputs like Graphics, Animation and Interactivity!
*Snapshots navigate on their own! However navigation buttons can also be used!

Yes Yen – Computer Based Training (CBT) & Management Solutions for
Industrial Operation, Maintenance & Technical Skills

  • Introduction, Classification of Valves
  • An extensive range of Valves covered
  • Extensive 2D / 3D Graphics, Models and Animations
  • Detailed coverage on Working, Dismantling, Assembly, etc.
  • Games on Component Assembly, Skill tests, Certificate printouts.
The Training Course on Valves covers a large range of Valve types like Gate valve, Globe valve, Ball valve, Needle valve, Plug valve, Diaphragm valve, Control valve, Safety valve, Relief valve, Check valve, etc. The Industrial Valve Training Course also includes a detailed coverage on Inverted Bucket Steam Trap, Float Steam Trap, Thermodynamic Steam Trap and Thermostatic Steam Trap Working. The primary focus on Valve Graphic / Valve Animation in the Industrial Valve Training Program helps in very clearly understanding Valve Maintenance Procedures & Valve Operating Principle / Valve Working Principle and aids in Valve Repair. A dedicated Game module in the CBT evaluates and guides the user towards providing a detailed knowledge on Valve Assembly and Dismantling. Animated Cut-Sections give a Deep Insight into Valve Operation and how Valves work.

The INDUSTRIAL VALVE TRAINING course is also available

Download DETAILED TOURS of all the Training Courses from the
Also avail other Engineering / Equipment related 'DOWNLOADS'!


1. Introduction
2. Types of Valve
2.1. Gate Valves
2.1.1. Rising Stem Gate Valves - Wedge type
2.1.2. Rising Stem Gate Valves - Double Disk type
2.1.3. Non Rising Stem Gate Valves - Wedge type
2.1.4. Non Rising Stem Gate Valves - Double Disk type
2.2. Globe Valves
2.2.1. Typical Globe Valves
2.2.2. Angle Globe Valves
2.3. Plug Valves
2.3.1. Single Port Valves
2.3.2. Multi Port Valves
2.3.3. Lubricant Seal Valves
2.4. Diaphragm Valves
2.5. Ball Valves
2.5.1. Flanged End Ball Valves
2.5.2. Screwed End Ball Valves
2.6. Butterfly Valves
2.6.1. Flanged End Butterfly Valves
2.6.2. Wafer Butterfly Valves
2.7. Needle Valves
2.8. Check valves
2.8.1. Lift Check Valves
2.8.2. Swing Check Valves
2.8.3. Ball Check Valves
2.9. Pressure Relief Devices
2.9.1. Relief Valves
2.9.2. Safety Valves
2.10. Control Valves
2.11. Steam Trap
2.11.1. Float Steam Traps
2.11.2. Thermostatic Steam Traps
2.11.3. Thermodynamic Steam Traps
2.11.4. Inverted Bucket Steam Traps
2.12. Strainer
2.12.1. Conical Strainers
2.12.2. Wye (Y) Strainers
2.12.3. Basket (Bucket) Strainers
3. Pressure testing of valves
(All the above topics are depicted and explained using plenty of 2D and 3D images, models and animations)
4. Games on Component Assembly
The user gets to assemble the various valves by observing and selecting respective 3D components, based on the understanding obtained from the CBT. The player is evaluated based on the correct positioning of the components and sequence of assembly. This module is sure to bring in a strong understanding of the various components of the valves, the relative locations and its dismantling and assembly procedure.
5. Conventional and Interactive Skill Tests with evaluation
Yes Yen GraphiTech – Benchmarked Training Solution Providers for Industrial Plant and Maritime / Marine Engineering – Operation (Operator), Maintenance, Engineer, Technician and Mechanic – Technical Skills Development...

Training Courses Stand-out with its focus on Multimedia Inputs like Graphic, Animation and Interactivity, which Generates Interest, Increases Understanding and Enhances Retention...

Computer Based Training (CBT) Software Courses available on a wide range of Industrial Technical Skills, Engineering Practices and Mechanical Equipment topics...

The Training Courses include Detailed Step-By-Step Explanations with Interactivity. Mechanical Equipment Courses include Step-By-Step general Procedure for Installation, Assembly and Dismantling. The primary focus on Graphics / Animations helps in very clearly understanding Operating / Working Principles & Maintenance Procedures and aids in Equipment Repair. Animated Equipment Cut-Sections give a Deep Insight into how the Equipment works...

Industrial Technical Training Content also developed for Customized Requirements...


Multimedia (Graphic / Animation / Interactivity) Focused Training Courses for Industrial Operation Training, Industrial Plant Operator Training & Industrial Maintenance Training – [Training Courses for Industrial Plant and Maritime / Marine Engineering – Mechanical Equipment, Operation, Operator, Maintenance, Engineer, Technician and Mechanic – Technical Skills Development]

About Maritime / Marine / Industrial Plant Operator Training & Maintenance Training Course Development

Process Industry Training Courses (Industrial Technical Training Courses for Plant – Operation / Operator & Industrial Maintenance)

-    Heat Exchanger Training Course with Heat Exchanger Animation (CBT - Computer Based Training)

-    Centrifugal Pump Training Course (includes API 610 types) and Pump Troubleshooting with Centrifugal Pump Animation (CBT - Computer Based Training)

-     Mechanical Seal Training Course and Mechanical Seal Selection Procedure (API 682 guided) with Mechanical Seal Animation (CBT - Computer Based Training)

-     Condition Based Maintenance Training and Condition Monitoring Training Course with Vibration Animation (CBT - Computer Based Training)

-     Rotating Equipment - Coupling / Shaft Alignment Training Course and Reverse Dial Indicator Method Alignment Tool with Alignment Animation (CBT - Computer Based Training)

-     Compressor Training Course (Centrifugal Compressor Training / Reciprocating Compressor Training / Rotary Compressor Training) with Centrifugal Compressor Animation / Reciprocating Compressor Animation / Rotary Compressor Animation (CBT - Computer Based Training)

-     Industrial Valve Training Course with Valve Animation (CBT - Computer Based Training)

-     Steam Turbine Training Course / Governing System Training Course / Governor Training Course with Turbine Animation / Governor Animation (CBT - Computer Based Training)

-     Distillation Training Course / Fractional Distillation Training Course / Fractionation Training Course with Distillation Animation / Fractionation Animation (CBT - Computer Based Training)

-     Positive Displacement Pump Training Course (Reciprocating Pump Training / Rotary Pump Training) and Pump Troubleshooting with Positive Displacement Pump Animation / Reciprocating Pump Animation / Rotary Pump Animation (CBT - Computer Based Training)

-     Oil and Gas Exploration Training / Oil and Gas Production Training Course with Animation (CBT - Computer Based Training)

-     Industrial Hydraulic Training Course with Hydraulic Circuit Animation (CBT - Computer Based Training)

Maritime Training Courses / Marine Training Courses / Marine Engineering Training Courses (Operation / Operator / Maintenance – Industrial Technical Training Courses)

FREE Industrial Mechanical Equipment Classification / Description / Games / Training with Graphic & Animation

This way (using Yes Yen CBTs) we can move forward with upgrading the fundamentals training, and have Yes Yen build more updated modules to replace our current material.
T. A. (Tom) Dahmen Chevron - Niche Refinery, U.S.A.
Copyright © 2014, Yes Yen GraphiTech, All rights reserved.