- PROCESS PLANT OPERATORS
- INDUSTRIAL MAINTENANCE
- COMMUNITY COLLEGES
(GEAR TYPES - GEAR WORKING / COUPLINGS
/ BEARING TYPES / BELT and CHAIN DRIVES)
TRAINING COURSE - CBT / WBT
The Training Course on Gear Types with intricate Gear Working Animation and Gear Drives,Coupling Types,Belt and Chain Drives and Bearing Types has been developed to assist in the Maintenance and Operation of Mechanical Power Transmission systems. The program, designed with extensive Graphics and Animation, gives a virtual Practical exposure on gear working, belt and chain drives, couplings and bearings.The training includes an interactive Failure Troubleshooting on Gears and Bearings.
Click above 'image' for Animated Demo/Guided Tour of the Mechanical Power Transmission
Training Course which focuses on Graphics, Animation and Step-by-Step Learning
BEARINGS / CHAIN and BELT DRIVES - A FEW HIGHLIGHTS
- Gear Types, Classification, Gear Working Animation, Various Types of Drives and Gear Failure Troubleshooting.
- Bearing Types, Classification and Bearing Failure Troubleshooting.
- Couplings - Rigid and Flexible Coupling Types, Classification.
- Belt Drives and Chain Drives.
- Extensive 2D / 3D Graphics, Models & Animations
- Skill tests, Certificate printouts.
The Mechanical Power Transmission Training Course extensively covers Gear Drives and Types, Coupling Types, Bearing Types and Belt and Chain Drives. It also includes an interactive Gear Failure Troubleshooting and Bearing FailureTroubleshooting based on the Failure symptoms observed in Gears and Bearings.
The Gear Drive module includes a GearClassification and various Gear Types like Spur, Helical, Rack, Spiral Bevel, Worm – Worm wheel, Zerol, Hypoid, etc with intricate Gear Working Animation. The module includes the Gear Ratio working principle and covers various Types of Gear Boxes. A Gear Failure Troubleshooting with interactive selection makes it a very useful reference tool.
The module on Couplings covers various Coupling Types and its classification based on rigid, materially flexible, mechanically flexible and miscellaneous types of flexible couplings. A large variety of couplings like Flange, Pin and Bush, Disc, Gear, Chain, Oldham, Universal joints, Fluid Couplings, etc are covered.
The Bearing module covers different Bearing types and a Bearing Classification based on friction and anti-friction bearings. Important concepts like oil whirl and whip are covered. The various bearing types explained include Radial, Thrust, hydrodynamic, hydrostatic, Ball and Roller bearings, etc. An interactive reference tool on Bearing Failure Troubleshooting explains the various failure modes with visual symptoms.
The module on Belt Drives and Chain Drives, extensively covers the various Belt Drive Types. It also explains important concepts like correct orientation, tight and slack sides, slip, creep, etc
With its intricate and extensive Graphics and Animation, the course provides a high virtual practical understanding on the topic Mechanical Power Transmission...
The MECHANICAL POWER TRANSMISSION TRAINING course provides a
Intricate, Practical (virtual), Comprehensive Knowledge on the Subject!
OPTIONS for INDUSTRIES / VOCATIONAL TRAINING INSTITUTES / COMMUNITY COLLEGES
Standalone optionUS$349
- For access in multiple systems (one at a time).
Multiple user option10 user - US$1050 50 user - US$1750Unlimited user - US$2100
- For simultaneous access in an organization LMS.
Multiple user option (SCORM)Customized rates based on requirement
- For simultaneous access in SCORM compliant organization LMS.
Online CLOUD hosting by Yes Yen Customized rates based on requirement-
- Features include CUSTOMIZED webpages for user access with the NAME and LOGO of the organization and individual user performance data.
CONTACT US for further details.
*note: Customized logo embedding provided in the above options.
- 1- INTRODUCTION
- 2-GEAR DRIVES
- 2.1- INTRODUCTION
- 2.2-INVOLUTE TOOTH PROFILE
- 2.3-GEAR TYPES WITH INTRICATE GEAR WORKING ANIMATION
- 2.3.1- GEAR CLASSIFICATION
- 2.3.2- SPUR GEARS
- 2.3.3- HELICAL GEARS
- 2.3.4- DOUBLE HELICAL GEAR / HERRINGBONE GEARS
- 2.3.5- SCREW GEAR OR CROSSED HELICAL GEAR
- 2.3.6- INTERNAL GEAR
- 2.3.7- SPUR RACK GEAR
- 2.3.8- HELICAL RACK GEAR
- 2.3.9- FACE GEAR
- 2.3.10- STRAIGHT BEVEL GEAR
- 2.3.11- SPIRAL BEVEL GEAR
- 2.3.12- ZEROL GEAR
- 2.3.13- HYPOID GEAR
- 2.3.14- WORM AND WORM WHEEL GEAR
- 2.3.15- DOUBLE ENVELOPING WORM GEAR
- 2.4-GEAR NOMENCLATURE
- 2.5-GEAR FAILURE / TROUBLESHOOTING (INTERACTIVE)
- 2.5.1- Polishing
- 2.5.2- Moderate wear
- 2.5.3- Excessive wear
- 2.5.4- Abrasive wear
- 2.5.5- Corrosive wear
- 2.5.6- Initial pitting
- 2.5.7- Destructive pitting
- 2.5.8- Electrical pitting
- 2.5.9- Spalling
- 2.5.10- Case crushing
- 2.5.11- Frosting
- 2.5.12- Moderate scoring
- 2.5.13- Localized scoring
- 2.5.14- Destructive scoring
- 2.5.15- Tip and root interference
- 2.5.16- Fatigue breakage
- 2.5.17- Overload breakage
- 2.5.18- Random fracture
- 2.5.19- Rim and web failure
- 2.5.20- Cold Flow
- 2.5.21- Ripping
- 2.5.22- Ridging
- 3-BELT and CHAIN DRIVE
- 3.1-BELT DRIVE WITH DETAILED WORKING ANIMATION
- 3.1.1- SLACK & TIGHT SIDE
- 3.1.2- BASIC BELT TYPES
- 3.1.3- FEATURES & TYPES
- 3.1.3.1- OPEN BELT DRIVE
- 3.1.3.2- CROSSED BELT DRIVE
- 3.1.3.3- RIGHT ANGLE (QUARTER TURN) BELT DRIVE
- 3.1.3.4- STEPPED (CONE) PULLEY DRIVE
- 3.1.3.5- FAST AND LOOSE PULLEY DRIVE
- 3.1.3.6- JOCKEY (IDLER) PULLEY
- 3.1.4- BELT SLIP
- 3.1.5- BELT CREEP
- 3.2- CHAIN DRIVE WITH DETAILED WORKING ANIMATION
- 3.2.1- ROLLER CHAIN
- 3.2.2- INVERTED TOOTH (SILENT)
- 4-COUPLINGS (WITH DETAILED GRAPHICS AND ANIMATION)
- 4.1-RIGID COUPLING TYPES
- 4.1.1- SLEEVE (MUFF) COUPLINGS
- 4.1.2- SLEEVE COUPLINGS WITH PINS
- 4.1.3- CONE RING COMPRESSION COUPLINGS
- 4.1.4- CLAMP COUPLINGS
- 4.1.5- FLANGE COUPLINGS
- 4.2-FLEXIBLE COUPLING TYPES – MATERIALLY FLEXIBLE
- 4.2.1- PIN AND BUSH COUPLING
- 4.2.2- JAW COUPLING
- 4.2.3- TIRE COUPLING
- 4.2.4- BELLOW COUPLING
- 4.2.5- BEAM COUPLING
- 4.2.6- DISC COUPLING
- 4.2.7- DIAPHRAGM COUPLING
- 4.3-FLEXIBLE COUPLING TYPES – MECHANICALLY FLEXIBLE
- 4.3.1-GEAR COUPLING
- 4.3.2-CHAIN COUPLING
- 4.3.3- OLDHAM OR SLIDE COUPLING
- 4.3.4-UNIVERSAL (HOOKE'S) JOINT COUPLING
- 4.4-FLEXIBLE COUPLING TYPES – MISCELLANEOUS
- 4.4.1-SPRING (GRID) COUPLING
- 4.4.2-FLUID (HYDRAULIC) COUPLING
- 5-BEARINGS (WITH DETAILED GRAPHICS AND ANIMATION)
- 5.1-INTRODUCTION
- 5.2-FRICTION BEARING TYPES – RADIAL (JOURNAL) BEARINGS
- 5.2.1-SOLID BEARINGS
- 5.2.2-SPLIT BEARINGS
- 5.2.3-SELF-ALIGNING BEARINGS
- 5.2.4-TILTING PAD RADIAL BEARINGS
- 5.3-FRICTION BEARING TYPES – THRUST BEARINGS
- 5.3.1-TILTING PAD THRUST BEARINGS
- 5.3.2-KINGSBURY AND MICHELL BEARINGS
- 5.3.3-EQUALIZING TYPE THRUST BEARINGS
- 5.4-FRICTION BEARING TYPES – HYDRODYNAMIC BEARINGS
- 5.4.1-BOUNDARY MODE LUBRICATION
- 5.4.2-MIXED MODE LUBRICATION
- 5.4.3- FULL MODE LUBRICATION
- 5.4.4- BEARING OPERATING CONDITION
- 5.4.5- STRIBECK CURVE
- 5.4.6- OIL WHIRL AND OIL WHIP
- 5.4.7- FIXED BORE CONCENTRIC BEARINGS
- 5.4.7.1- CIRCUMFERENTIAL GROOVE BEARINGS
- 5.4.7.2- AXIAL GROOVE BEARINGS
- 5.4.7.3- PRESSURE DAM BEARINGS
- 5.4.8- NON-CONCENTRIC BEARINGS
- 5.4.8.1- ELLIPTICAL (LEMON BORE) BEARINGS
- 5.4.8.2- THREE/FOUR LOBE BEARINGS
- 5.4.8.3- OFFSET SPLIT BEARINGS
- 5.4.9- TILTING PAD BEARINGS
- 5.5-FRICTION BEARING TYPES – HYDROSTATIC BEARINGS
- 5.6- ANTI-FRICTION – BALL BEARINGS - TYPES
- 5.6.1- SINGLE ROW BALL BEARINGS
- 5.6.2- DOUBLE ROW BALL BEARINGS
- 5.6.3- ANGULAR CONTACT BALL BEARINGS
- 5.6.3.1- SINGLE ROW
- 5.6.3.2- TANDEM
- 5.6.3.3- BACK TO BACK
- 5.6.3.4- FACE TO FACE
- 5.6.3.5- DOUBLE ROW
- 5.6.3.6- 4 POINT CONTACT
- 5.6.4- SELF ALIGNINIG BALL BEARINGS
- 5.6.5- THRUST BALL BEARINGS
- 5.6.5.1- SINGLE ACTING
- 5.6.5.2- DOUBLE ACTING
- 5.6.6- LINEAR (SLIDE) BALL BEARINGS
- 5.7- ANTI-FRICTION – ROLLER BEARINGS - TYPES
- 5.7.1- CYLINDRICAL ROLLER BEARINGS
- 5.7.1.1- FREE END
- 5.7.1.2- LIMITED AXIAL LOAD
- 5.7.1.3- FIXED END
- 5.7.2- NEEDLE ROLLER BEARINGS
- 5.7.3- TAPERED ROLLER BEARINGS
- 5.7.3.1- SINGLE ROW
- 5.7.3.2- FACE TO FACE
- 5.7.3.3- BACK TO BACK
- 5.7.3.4- TANDEM
- 5.7.3.5- DOUBLE ROW
- 5.7.3.6- FOUR ROW
- 5.7.4- SPHERICAL (SELF ALIGNING) ROLLER BEARINGS
- 5.7.5- BARREL (SELF ALIGNING) ROLLER BEARINGS
- 5.7.6- THRUST ROLLER BEARINGS
- 5.7.6.1 CYLINDRICAL
- 5.7.6.2 NEEDLE
- 5.7.6.3 SPHERICAL
- 5.7.6.4 TAPERE
- 5.8- SHIELDS AND SEALS
- 5.9- BEARING FAILURE / TROUBLESHOOTING (INTERACTIVE)
- 5.9.1- Spalling (normal fatigue wear)
- 5.9.2- Excessive loads
- 5.9.3- Overheating
- 5.9.4- True brinelling
- 5.9.5- False brinelling
- 5.9.6- Reverse loading
- 5.9.7- Contamination
- 5.9.8- Lubrication failure
- 5.9.9- Corrosion
- 5.9.10- Misalignment
- 5.9.11- Loose fit
- 5.9.12- Tight fit
- 6- ASSESSMENT WITH EVALUATION AND CERTIFICATE PRINTOUT
The MECHANICAL POWER TRANSMISSION TRAINING course provides a
Intricate, Practical (virtual), Comprehensive Knowledge on the Subject!
OPTIONS for INDUSTRIES / VOCATIONAL TRAINING INSTITUTES / COMMUNITY COLLEGES
Standalone optionUS$349
- For access in multiple systems (one at a time).
Multiple user option10 user - US$1050 50 user - US$1750Unlimited user - US$2100
- For simultaneous access in an organization LMS.
Multiple user option (SCORM)Customized rates based on requirement
- For simultaneous access in SCORM compliant organization LMS.
Online CLOUD hosting by Yes Yen Customized rates based on requirement-
- Features include CUSTOMIZED webpages for user access with the NAME and LOGO of the organization and individual user performance data.
CONTACT US for further details.
*note: Customized logo embedding provided in the above options.